Return to Home Page

Publications and Presentations of Eric M. Taleff

References from the Publications and Presentations of Prof. Eric M. Taleff are listed here.

Publications

Refereed Journal Articles

  1. Douglas A. Dalton, Jonathan L. Brewer, Aaron C. Bernstein, Evan D. Jackson, Will Grigsby, Despina Milathianaki, R. Adams, P. Rambo, J. Schwarz, A. Edens, M. Geissel, I. Smith, E. M. Taleff and T. Ditmire. "Laser-Induced Spallation of Aluminum and Al Alloys at Strain Rates Above 2x106 s-1." Accepted to Journal of Applied Physics, May 2008.
  2. Ningning Du, Allan F. Bower, Paul E. Krajewski and Eric M. Taleff. "The Influence of a Threshold Stress for Grain Boundary Sliding on Constitutive Response of Polycrystalline Al during High Temperature Deformation." Accepted to Materials Science and Engineering A, January 2008.
  3. Terry R. McNelley, Keiichiro Oh-oishi, Alexander P. Zhilyaev, Srinivasan Swaminathan, Paul E. Krajewski and Eric M. Taleff. "Characteristics of the Transition from Grain Boundary Sliding to Solute Drag Creep in Superplastic AA5083." Metallurgical and Materials Engineering A, Vol. 39, No. 1, pp. 50-64, 2008.
  4. Jonathan L. Brewer, D. Allen Dalton, Evan D. Jackson, Aaron C. Bernstein, Will Grigsby, Eric M. Taleff and Todd Ditmire. "Influence of Microstructure on the Spall Failure of Aluminum Materials." Metallurgical and Materials Transactions A, Vol. 38, pp. 2666-2673, 2007.
  5. Mary-Anne Kulas, Paul E. Krajewski, John R. Bradley and Eric M. Taleff. "Forming-Limit Diagrams for Hot-Forming of AA5083 Aluminum Sheet: Continuously-Cast Material." Journal of Materials Engineering and Performance, Vol. 13(3), pp. 308-313, 2007.
  6. Sumit Agarwal, Clyde L. Briant, Paul E. Krajewski, Allan F. Bower and Eric M. Taleff. "Experimental Validation of Two-Dimensional Finite Element Method for Simulating Constitutive Response of Polycrystals during High Temperature Plastic Deformation." Journal of Materials Engineering and Performance, Vol. 13(2), pp. 170-178, 2007.
  7. James R. Ciulik and Eric M. Taleff. "Power-Law Creep of Powder-Metallurgy Grade Molybdenum Sheet." Materials Science and Engineering A, Vol. 463, pp. 197-202, 2007.
  8. Mary-Anne Kulas, Paul E. Krajewski, John R. Bradley and Eric M. Taleff. "Forming Limit Diagrams for AA5083 under SPF and QPF Conditions." Materials Science Forum, Vols. 551-552, pp. 129-134, 2007.
  9. S. J. Bless, K. R. Tarcza, R. Chau, E. M. Taleff, and C. Persad. "Dynamic Fracture of Tungsten Heavy Alloys." International Journal of Impact Engineering, Vol. 33, pp. 100-108, 2006.
  10. W. Paul Green, Mary-Anne Kulas, Amanda Niazi, Keiichiro Oh-ishi, Eric M. Taleff, Paul E. Krajewski, and Terry R. McNelley. "Deformation and Failure of a Superplastic AA5083 Aluminum Alloy with Cu Additions." Metallurgical and Materials Transactions A, Vol. 37A, pp. 2727-2738, 2006.
  11. Mary-Anne Kulas, W. Paul Green, Eric M. Taleff, Paul E. Krajewski, and Terry R. McNelley. "Failure Mechanisms in Superplastic AA5083 Materials." Metallurgical and Materials Transactions A, Vol. 37A, pp. 645-655, 2006.
  12. Eric M. Taleff, W. Paul Green, Mary-Anne Kulas, Terry R. McNelley and Paul E. Krajewski. "Analysis, Representation, and Prediction of Creep Transients in Class I Alloys." Materials Science and Engineering A, Vol. 410-411, pp. 32-37, 2005.
  13. Mary-Anne Kulas, W. Paul Green, Eric M. Taleff, Paul E. Krajewski and Terry R. McNelley. "Deformation Mechanisms in Superplastic AA5083 Materials." Metallurgial and Materials Transactions A, Vol. 36A, pp. 1249-1261, 2005.
  14. Jue Wang, Eric M. Taleff, and Desiderio Kovar. "Superplastic Deformation of Al2O3/Y-TZP Particulate Composites and Laminates." Acta Materialia, Vol. 52, No. 19, pp. 5485-5491, 2004.
  15. Jue Wang, Eric M. Taleff, and Desiderio Kovar. "High-Temperature Deformation of Al2O3/Y-TZP Particulate Laminates." Acta Materialia, Vol. 52, No. 15, pp. 4685-4693, 2004.
  16. Jue Wang, Eric M. Taleff, and Desiderio Kovar. "High-Temperature Deformation of Al2O3/Y-TZP Particulate Composites." Acta Materialia, Vol. 51, No. 12, pp. 3571-3583, 2003.
  17. Dustin C. Balderach, Jennifer A. Hamilton, Emma Leung, M. Cristina Tejeda, Jun Qiao, and Eric M. Taleff. "The Paint-Bake Response of Three Al-Mg-Zn Alloys." Materials Science and Engineering A, Vol. 339, No. 1-2, pp. 194-204, January 2003.
  18. Alberto Fernández-Vicente, Manuel Carsí, Félix Peñalba, Eric M. Taleff, and Oscar A. Ruano. "Toughness Dependence on the Microstructural Parameters for an Ultrahigh-Carbon Steel (1.3 wt.% C)." Materials Science and Engineering A, Vol. A335, No. 1-2, pp. 175-185, September 2002.
  19. Todd O. Sullivan, Nathan A. Byman, Frédéric Landry, David G. Kolman, and Eric M. Taleff. "Corrosion Resistance of Structural Materials to Ga2O at 1000 °C." Journal of Nuclear Materials, Vol. 303, No. 1, pp. 73-81, May 2002.
  20. Oleg D. Sherby and Eric M. Taleff. "Influence of Grain Size, Solute Atoms, and Second-Phase Particles on Creep Behavior of Polycrystalline Solids." Materials Science and Engineering A, Vol. A322, No. 1-2, pp. 89-99, January 2002.
  21. Eric M. Taleff, Peter J. Nevland, and Paul E. Krajewski. "Tensile Ductility of Several Commercial Aluminum Alloys at Elevated Temperatures." Metallurgical and Materials Transactions A, Vol. 32A, pp. 1119-1130, May 2001.
  22. Eric M. Taleff, Bruce L. Bramfitt, Chol K. Syn, Donald R. Lesuer, Jeffrey Wadsworth, and Oleg D. Sherby. "Processing, Structure, and Properties of a Rolled, Ultrahigh-Carbon-Steel Plate Exhibiting and Damask Pattern." Materials Characterization, Vol. 46, No. 1, pp. 11-18, May 2001.
  23. Eric M. Taleff, Teodoro Leon-Salamanca, Richard A. Ketcham, Reuben Reyes, and William D. Carlson. "Nondestructive Evaluation of Cavitation in an Al-Mg Material Deformed under Creep Conditions." Journal of Materials Research, Vol. 15, No. 1, pp. 76-84, January 2000.
  24. Woo-Jin Kim, Eric M. Taleff, and Oleg D. Sherby. "Superplasticity of Fine-Grained Fe-C Alloys Prepared by Ingot and Powder-Processing Routes." Journal of Materials Science, Vol. 33, No. 20, pp. 4977-4985, October 1998.
  25. Eric M. Taleff, Gregory A. Henshall, T. G. Nieh, Donald R. Lesuer, and Jeffrey Wadsworth. "Warm-Temperature Ductility in Al-Mg Alloys." Metall. Mater. Trans. A, Vol. 29A, No. 3A, pp. 1081-1091, March 1998.
  26. K. S. Ball, M. Song, M. Gomon, M. W. Silva, E. M. Taleff, B. M. Powers, and T. L. Bergman. "Canister Filling with a Molten Glass Jet." ASME Journal of Heat Transfer, Vol. 119, No. 2, p. 204, 1997.
  27. Eric M. Taleff, Mamoru Nagao, Kenji Higashi, and Oleg D. Sherby. "High-Strain-Rate Superplasticity in Ultrahigh-Carbon Steel Containing 10 wt.% Al (UHCS-10Al)." Scripta Metall. Mater., Vol. 34, No. 12, pp. 1919-1923, 1996.
  28. Eric M. Taleff, Mamoru Nagao, Yoshio Ashida, and Oleg D. Sherby. "Synthesis of Submicrometer-Grained-Ultrahigh-Carbon Steel Containing 10% Aluminum by Ball Millling of Powders." J. Mater. Res., Vol. 11, No. 11, pp. 2725-2730, 1996.
  29. Eric M. Taleff, Chol K. Syn, Donald R. Lesuer, and Oleg D. Sherby. "Pearlite in Ultrahigh Carbon Steels: Heat Treatments and Mechanical Properties." Metall. Mater. Trans. A, Vol. 27A, No. 1, pp. 111-118, 1996.
  30. Eric M. Taleff, Donald R. Lesuer, and Jeffrey Wadsworth. "Enhanced Ductility in Coarse-Grained Al-Mg Alloys." Metall. Mater. Trans. A, Vol. 27A, No. 2, pp. 343-352, 1996.
  31. Woo-Jin Kim, Eric M. Taleff, and Oleg D. Sherby. "A Proposed Deformation Mechanism for High Strain-Rate Superplasticity." Scripta Metall. Mater., Vol. 32, No. 10, pp. 1625-1630, May 1995.
  32. Eric M. Taleff and Oleg D. Sherby. "Mechanical Behavior of Fine-Grained Mg-6.5Li at Elevated Temperature." J. Mater. Res., Vol. 9, No. 6, pp. 1392-1396, 1994.
  33. Eric M. Taleff, Oscar A. Ruano, Jeff Wolfenstine, and Oleg D. Sherby. "Superplastic Behavior of a Fine-Grained Mg-9Li Material at Low Homologous Temperature." J. Mater. Res., Vol. 7, No. 8, pp. 2131-2135, 1992.

Other Journal Articles

  1. Eric M. Taleff, Garud B. Sridhar, and Bamdad Pourladian. "Strength-Microstructure Relationships in Pearlitic Eutectoid and Hypereutectoid Steels." Wire Journal International, Vol. 36, No. 10, pp. 73-77 October, 2003.
  2. Eric M. Taleff. "Microstructure-Property Relationships in Steels: Improving Performance." JOM, Vol. 54, No. 7, p. 18, July 2002.
  3. Eric M. Taleff, John J. Lewandowski, and Bamdad Pourladian. "Microstructure-Property Relationships in Pearlitic Eutectoid and Hypereutectoid Carbon Steels." JOM, Vol. 54, No. 7, pp. 25-30, July 2002.
  4. Eric M. Taleff. "Elevated-Temperature Deformation Mechanisms and Tensile Ductility" JOM, Vol. 51, No. 1, p. 33, January 1999.
  5. Eric M. Taleff and Peter J. Nevland. "The High-Temperature Deformation and Tensile Ductility of Al Alloys" JOM, Vol. 51, No. 1, pp. 34-36, January 1999.

Books and Other Published Works

  1. Eric M. Taleff, Peter A. Friedman, Paul E. Krajewski, Rajiv S. Mishra, and James G. Schroth, editors, Advances in Superplasticity and Superplastic Forming, 384 pages (TMS: Warrendale, PA) 2004.
  2. D.R. Lesuer, T.S. Srivatsan, and Eric M. Taleff, editors. Modeling the Performance of Engineering Structural Materials III, (TMS: Warrendale, PA) 2002.
  3. Mitsuo Niinomi, Toru Okabe, Eric M. Taleff, Donald R. Lesuer, and Henry E. Lippard, editors. Structural Biomaterials for the 21st Century, 288 pages (TMS:Warrendale, PA) 2001.
  4. Eric M. Taleff, Chol K. Syn, and Donald R. Lesuer, editors. Deformation, Processing, and Properties of Structural Materials: A Symposium Honoring Professor Oleg D. Sherby, (TMS: Warrendale, PA) March 2000.
  5. Eric M. Taleff and Rao K. Mahidhara, editors. Modeling the Mechanical Response of Structural Materials, (TMS: Warrendale, PA) 1998.
  6. Eric M. Taleff. Superplasticity at High Strain-Rates in Fine-Grain Ultrahigh-Carbon Steel. PhD thesis, Stanford University, 1994.

Conference Proceedings

  1. Eric M. Taleff, "Overview of 5000-Series Aluminum Materials for Hot Forming in the Automotive Industry." In S. K. Das, G. Jha, Z. Li, T. Zhai and J. Liu, editors, Aluminum Wrought Products for Automotive, Packaging, and Other Applications - The James Morris Honorary Symposium, pp. 87-96 (TMS: Warrendale, PA) 2006.
  2. James R. Ciulik and Eric M. Taleff, "Dynamic Abnormal Grain Growth in Commercial-Purity Molybdenum." Proceedings of the 2006 International Conference on Tungsten, Refractory & Hardmetals VI, Orlando, Florida, February 7-8, 2006 (Metal Powder Industries Federation,).
  3. James Ciulik and Eric M. Taleff, "Power-Law Creep of Commercial-Purity Molybdenum Sheet." Creep Deformation and Fracture, Design, and Life Extension (Proceedings of a Symposium Sponsored by Materials Science & Technology 2005, Pittsburgh, Pennsylvania, September 25-28, 2005), Edited by Ravij Mishra, James C. Earthman, Sai V. Raj and R. Viswanathan, pp. 55-63 (TMS: Warrendale, PA) 2005.
  4. James R. Ciulik and Eric M. Taleff, "Abnormal Dynamic Grain Growth During Creep Deformation of Powder-Metallurgy (PM) Grade Molybdenum Sheet." Proceedings of the Space Nuclear Conference, Paper No. 1069 (San Diego, CA, June 5-9: American Nuclear Society) 2005.
  5. Eric M. Taleff. "An Overview of Creep Deformation Behaviors in 5000-Series and Al-Mg Alloys." In Eric M. Taleff, Peter A. Friedman, Paul E. Krajewski, Rajiv S. Mishra, and James G. Schroth, editors, Advances in Superplasticity and Superplastic Forming, pp. 85-94 (TMS: Warrendale, PA) 2004.
  6. Mary-Anne Kulas, W. Paul Green, Ellen C. Pettenfill, Paul E. Krajewski, and Eric M. Taleff. "Superplastic Failure Mechanisms and Ductility of AA5083." In Eric M. Taleff, Peter A. Friedman, Paul E. Krajewski, Rajiv S. Mishra, and James G. Schroth, editors, Advances in Superplasticity and Superplastic Forming, pp. 127-138 (TMS: Warrendale, PA) 2004.
  7. Jue Wang, Desiderio Kovar, and Eric M. Taleff. "Deformation of Superplastic Al2O3/Y-TZP Particulate and Particulate Laminate Composites." In Eric M. Taleff, Peter A. Friedman, Paul E. Krajewski, Rajiv S. Mishra, and James G. Schroth, editors, Advances in Superplasticity and Superplastic Forming, pp. 265-273 (TMS: Warrendale, PA) 2004.
  8. C.K. Syn, D.R. Lesuer, O.D. Sherby, and E.M. Taleff. "Stress-Strain Rate Relations in Ultrahigh Carbon Steels Deformed in the Ferrite Range of Temperature." Materials Science Forum, Vol. 426-432, No. 2, pp. 853-858, 2003.
  9. O.D. Sherby, M. Carsi, W.J. Kim, D.R. Lesuer, O.A. Ruano, C.K. Syn, E.M. Taleff, and J. Wadsworth. "Mechanical Property - Microstructure Relations in Iron-Carbon Alloys from 1.0 to 5.2% Carbon." Materials Science Forum, Vol. 426-432, No. 1, pp. 11-18, 2003.
  10. Mary-Anne Kulas, Paul E. Krajewski, Terry R. McNelley, and Eric M. Taleff. "Deformation and Failure Mechanisms in Commercial AA5083 Materials." In Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, editors, Hot Deformation of Aluminum Alloys III, pp. 499-507 (TMS: Warrendale, PA) 2003.
  11. Eric M. Taleff, Garud B. Sridhar, and Bamdad Pourladian. "Strength-Microstructure Relationships in Pearlitic Eutectoid and Hypereutectoid Steels." In 2002 Conference Proceedings of The Wire Association International, Inc.: Wire & cable Technical Symposium, 72nd Annual Convention, Chicago, IL, USA, pp. 79-92 (The Wire Association International, Inc.: Guilford, CT) June 2002.
  12. Todd O. Sullivan, Jue Wang, Desiderio Kovar, and Eric M. Taleff. "Development of Superplastic Al2O3/Y-TZP Duplex Laminates." In N.P. Bansal, J.P. Singh, and H.-T. Lin, editors, Ceramic Transactions Vol. 128: Advances in Ceramic-Matrix Composites VII, pp. 89-100 (The American Ceramic Society: Westerville, OH) 2001.
  13. Eric M. Taleff and Jun Qiao. "Numerical Modeling of Solute-Drag Creep." In D.R. Lesuer and T.S. Srivatsan, editors, Modeling the Performance of Engineering Structural Materials II, pp. 3-12 (TMS: Warrendale, PA) 2001.
  14. Eric M. Taleff and Jun Qiao. "The Effects of Ternary Alloying Additions on Warm and Hot Deformation in Al-Mg Alloys." In M. Sahoo and T. Lewis, editors, Light Metals 2001: Métaux Légers, pp. 77-88 (Canadian Institute of Mining, Metallurgy, and Petrolium: Montreal, Quebec) 2001.
  15. Alberto Fernández-Vicente, Manuel Carsí, Félix Peñalba, Eric M. Taleff, and Oscar A. Ruano. "Fracture Behavior of Two Ultrahigh-Carbon Steels." In Eric M. Taleff, Chol K. Syn, and Donald R. Lesuer, editors, Deformation, Processing, and Properties of Structural Materials, pp. 55-68 (TMS: Warrendale, PA) 2000.
  16. Eric M. Taleff, Peter J. Nevland, and Sean J. Yoon. "The Effect of Ternary Alloying Additions on Solute-Drag Creep in Aluminum-Magnesium Alloys." In Eric M. Taleff, Chol K. Syn, and Donald R. Lesuer, editorsm, Deformation, Processing, and Properties of Structural Materials, pp. 373-384 (TMS: Warrendale, PA) 2000.
  17. Eric M. Taleff, Peter J. Nevland, and Paul E. Krajewski. "Solute-Drag Creep and Tensile Ductility in Aluminum Alloys." In Rajiv S. Mishra , Amiya K. Mukherjee, and K. Linga Murty, editors, Creep Behavior of Advanced Materials for the 21st Century, pp. 349-358 (TMS: Warrendale, PA) 1999.
  18. Eric M. Taleff, Woo-Jin Kim, and Oleg D. Sherby. "Predicting High-Strain-Rate Superplasticity in UHCS-10Al". In Eric M. Taleff and Rao K. Mahidhara, editors, Modeling the Mechanical Response of Structural Materials, pp. 209-218 (TMS: Warrendale, PA) 1998.
  19. Eric M. Taleff, Chol K. Syn, Donald R. Lesuer, and Oleg D. Sherby. "A Comparison of Mechanical Behavior in Pearlitic and Spheroidized Hypereutectoid Steels." In Donald R. Lesuer, Chol K. Syn, and Oleg D. Sherby, editors, Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, pp. 127-142 (TMS: Warrendale, PA) 1997.
  20. Eric M. Taleff, Bruce L. Bramfitt, Chol K. Syn, Donald R. Lesuer, and Oleg D. Sherby. "Mechanical Behavior of an Ultrahigh-Carbon Steel Exhibiting a Damask Surface Pattern." In Donald R. Lesuer, Chol K. Syn, and Oleg D. Sherby, editors, Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, pp. 189-198 (TMS: Warrendale, PA) 1997.
  21. Eric M. Taleff and Woo-Jin Kim. "The Roles of Grain-Boundary Sliding and Dislocation-Pipe Diffusion in High-Strain-Rate Superplasticity." In James C. Earthman, editor, Creep and Fracture of Engineering Materials and Structures, pp. 215-224 (TMS: Warrendale, PA) 1997.
  22. Kenneth S. Ball and Eric M. Taleff. "Can-in-Canister Alternative for Vitrification of Surplus Weapons Plutonium: Overview of Thermal Issues." In K. L. Peddicord, ed., Nuclear Materials Safety Management, NATO Advanced Research Workshop, (Kluwer Academic Publishers: Boston) 1997.
  23. Eric M. Taleff, Donald R. Lesuer, Chol K. Syn, and Gregory A. Henshall. "Creep Fracture During Solute-Drag Creep and Superplastic Deformation." In Rao K. Mahidhara, Andrew B. Geltmacher, Peter Matic, and Kuntimaddi Sadananda, editors, Recent Advances in Fracture, pp. 295-306 (TMS: Warrendale, PA) 1997.
  24. Donald R. Lesuer, T. G. Nieh, Chol K. Syn, and Eric M. Taleff. "Superplastic Deformation in Two Microduplex Stainless Steels." In Atul H. Chokshi, editor, Superplasticity in Advanced Materials (ICSAM-97), pp. 469-474 (Trans Tech Publications: Zuerich, Switzerland) 1997.
  25. Jeffrey Wadsworth, Gregory A. Henshall, T. G. Nieh, and Eric M. Taleff. "Materials Issues in Some Advanced Forming Techniques, Including Superplasticity." In T. J. Bennett and G. A. Hazelrigg, editors, Emerging Technologies, pp. 87-94 (ASME Book No. I00386-1995) 1995.
  26. Eric M. Taleff, Gregory A. Henshall, Donald R. Lesuer, T. G. Nieh, and Jeffrey Wadsworth. "Enhanced Tensile Ductility in Al-Mg Alloys by Solid-Solution Interactions." In J. Daniel Bryant and Dawn R. White, editors, Aluminum and Magnesium for Automotive Applications, pp. 125-134 (TMS: Warrendale, PA) 1995.
  27. Eric M. Taleff, Gregory A. Henshall, Donald R. Lesuer, T. G. Nieh, and Jeffrey Wadsworth. "Enhanced Ductility of Coarse-Grain Al-Mg Alloys." In Amit K. Ghosh and Thomas R. Bieler, editors, Superplasticity and Superplastic Forming, pp. 3-10 (TMS: Warrendale, PA) 1995.
  28. Eric M. Taleff, Gregory A. Henshall, Donald R. Lesuer, and T. G. Nieh. "Warm Formability of Aluminum-Magnesium Alloys." In T. H. Sanders and E. A. Starke, Jr., editors, Aluminum Alloys: Their Physical Properties and Mechanical Properties (ICAA4), pp. 338-345 (Georgia Institute of Technology: Atlanta, GA) 1994.

To the top of page

Presentations

  1. James R. Ciulik and Eric M. Taleff, "Microstructural Characterization of Dynamic Abnormal Grain Growth in Molybdenum." Presentation in Refractory Metals 2008, TMS 2008 Annual Meeting in New Orleans, LA, March 9-13, 2008.
  2. Jung-Kuei "Brian" Chang, Eric M. Taleff and Paul E. Krajewski, "Three Dimensional Characterization of Microstructure in Hot-Deformed AA5083 for Understanding Cavitation Damage." Presentation in 3-Dimensional Materials Science, TMS 2008 Annual Meeting in New Orleans, LA, March 9-13, 2008.
  3. Eric M. Taleff, Louis Hector, Ravi Verma, John Bradley and Paul E. Krajewski, "The Use of Experimentally-Based Material Models in Simulating High-Temperature Forming of Aluminum and Magnesium Sheet." Presentation in Aluminum Alloys: Fabrication,Characterization and Applications, TMS 2008 Annual Meeting in New Orleans, LA, March 9-13, 2008.
  4. Ningning Du, Alan F. Bower, Paul E. Krajewski and Eric M. Taleff, "Numerical Simulations of Void Growth by Coupled Grain Boundary Sliding, Diffusion and Dislocation Creep during Elevated Temperature Deformation of AA5083." Presentation in Aluminum Alloys: Fabrication,Characterization and Applications, TMS 2008 Annual Meeting in New Orleans, LA, March 9-13, 2008.
  5. James R. Ciulik, Andrea Pearlman and Eric M. Taleff, "Power-Law Creep of Commercial-Purity Tungsten Sheet." Presentation in The International Symposium on Plasticity 2008 in Kailua/Kona, HI, January 3, 2008.
  6. Jung-Kuei "Brian" Chang, Eric M. Taleff and Paul E. Krajewski, "Microstructure Effects on Cavitation of AA5083 Sheet during Hot Forming." Presentation in Automotive and Ground Vehicles: Materials and Processes for Vehicles, Materials Science & Technology 2007 in Detroit, MI, September 16-20, 2007.
  7. Eric M. Taleff and Paul E. Krajewski, "Failure Mechanisms and Formability in Hot Forming of AA5083 Sheet." Presentation in Automotive and Ground Vehicles: Materials and Processes for Vehicles, Materials Science & Technology 2007 in Detroit, MI, September 16-20, 2007.
  8. Eric M. Taleff, Louis G. Hector and Paul E. Krajewski, "Constitutive Modeling of Flow in AA5083 Sheet during Hot Forming." Invited Presentation in Characterization and Modeling of the Mechanical Performance of Advanced Alloys - Bridging the Data Gap, Materials Science & Technology 2007 in Detroit, MI, September 16-20, 2007.
  9. Eric M. Taleff, "Materials Science Research and Education in the U.S.A." Invited presentation at the Osaka Prefectural University, Sakai, Japan, June 4, 2007.
  10. Eric M. Taleff, "AA5182 Sheet Material Study: Mechanical Behavior at 300-400°C and Abnormal Grain Growth." Invited presentation to Furukawa-Sky Aluminum Corp. and Nippon Steel Corp., Fukaya, Japan, May 30, 2007.
  11. Eric M. Taleff, "Fundamentals of High-Temperature Deformation for Al-Mg and 5000-Series Aluminum Alloys." Invited presentation to Furukawa-Sky Aluminum Corp. and Nippon Steel Corp., Fukaya, Japan, May 30, 2007.
  12. Jonathan L. Brewer, D. Allen Dalton, Evan D. Jackson, Aaron C. Bernstein, Will Grigsby, Eric M. Taleff and Todd Ditmire, "Influence of Microstructure on the Spall Failure of Aluminum Materials." Dynamic Behavior of Materials, 2007 TMS Annual Meeting in Orlando, FL, February 26, 2007.
  13. Jung-Kuei "Brian" Chang, Eric M. Taleff and Paul E. Krajewski, "Three-Dimensional Evaluation of Microstructure in AA5083 after Hot Deformation." Aluminum Alloys for Transportation, Packaging, Aerospace and Other Applications, 2007 TMS Annual Meeting in Orlando, FL, February 28, 2007.
  14. Mary-Anne Kulas, Paul E. Krajewski, John R. Bradley and Eric M. Taleff, "Influence of Failure Mechanisms on Forming-Limit Diagrams for Hot Forming of AA5083 Aluminum Sheet." Innovations in Matal Forming Symposium, Materials Science and Technology 2006 in Pittsburgh, PA, October 15-18, 2006.
  15. Mary-Anne Kulas, Paul E. Krajewski, John R. Bradley and Eric M. Taleff, "Forming Limit Diagrams for AA5083 under SPF and QPF Conditions." International Conference on Superplasticity in Advanced Materials, in ChengDu, China, June 23-26, 2006.
  16. Eric M. Taleff, "Microstructural Evolution in Fully Pearlitic Steel during Wire Drawing and Its Measurement by Electrical Resistivity." Invited presentation at Nippon Steel Corp., Research and Development Center in Futtsu-city, Japan on May 31, 2006.
  17. Eric M. Taleff, "Hot Deformation and Failure of AA5083 Material with a Cu Addition." Invited presentation at Nippon Steel Corp., Research and Development Center in Futtsu-city, Japan on May 31, 2006.
  18. Eric M. Taleff, "Hot Deformation and Failure of AA5083 Material with a Cu Addition." Invited presentation at Osaka Prefectural University in Osaka, Japan, May 29, 2006.
  19. James R. Ciulik and Eric M. Taleff, "Effects of Microstructure on Creep Properties of Commercial-Purity Molybdenum." Amiya Mukherjee Symposium on Processing and Mechanical Response of Engineering Materials, 2006 TMS Annual Meeting in San Antonio, TX, March 12-16, 2006.
  20. Eric M. Taleff, "Overview of 5000-Series Aluminum Materials for Hot Forming in the Automotive Industry." Aluminum Wrought Products for Automotive, Packaging, and Other Applications-James Morris Honorary Symposium, 2006 TMS Annual Meeting in San Antonio, TX, March 12-16, 2006.
  21. James R. Ciulik and Eric M. Taleff, "Dynamic Abnormal Grain Growth in Commercial-Purity Molybdenum." 2006 International Conference on Tungsten, Refractory and Hardmetals VI in Orlando, FL, February 7-8, 2006.
  22. S. J. Bless, K. R. Tarcza, M. Huerta, R. Russell, E. Taleff, "Deflection and Fracture of Tungsten Rods by Yawed Impact." 22nd International Symposium on Ballistics (ISB), Vancouver, BC, Canada, November 14-18, 2005.
  23. Amanda Niazi, Jung-Kuei (Brian) Chang, Eric M. Taleff, and Paul E. Krajewski, "Solute-Drag Creep Transient Dependence on Time and Strain." Creep Deformation and Fracture, Design, and Life Extension, a symposium at Materials Science and Technology 2005, Pittsburgh, PA, September 25-28, 2005.
  24. James Ciulik and Eric M. Taleff, "Power-Law Creep of Commercial-Purity Molybdenum Sheet." Creep Deformation and Fracture, Design, and Life Extension, a symposium at Materials Science and Technology 2005, Pittsburgh, PA, September 25-28, 2005.
  25. Sumit Agarwal, Clyde L. Briant, Paul E. Krajewski, Allan F. Bower and Eric M. Taleff, "Experimental Validation of Two-Dimensional Finite Element Method for Simulating Constitutive Response of Polycrystals during High Temperature Plastic Deformation." The 16th AeroMat Advanced Aerospace Materials and Processes Conference and Exposition, AeroMat 2005, Orlando, Florida, June 6-9, 2005.
  26. Eric M. Taleff, "The Potential of Superplastic Materials in Manufacturing: The Case of Al-Mg Alloys." Invited presentation at the 2nd JSME/ASME International Conference on Materials and Processing 2005 (13th JSME Materials and Processing Conference) in Seattle, WA, June 21, 2005.
  27. Eric M. Taleff, "Recent Development for Aluminum Superplastic and Solute-Drag Forming Technologies in Japan." Presentation at the General Motors Corp. Research and Development Center in Warren, MI, June 15, 2005.
  28. James R. Ciulik and Eric M. Taleff. "Abnormal Dynamic Grain Growth During Creep Deformation of Powder-Metallurgy (PM) Grade Molybdenum Sheet." Presentation at the American Nuclear Society: Space Nuclear Conference 2005 in San Diego, CA, June 5-9, 2005.
  29. Eric M. Taleff, "Superplasticity and Solute-Drag Creep in Manufacturing: Al-Mg Alloys." Invited presentation at Osaka Prefectural University in Osaka, Japan, May 26, 2005.
  30. Eric M. Taleff, "Superplasticity and Solute-Drag Creep in Manufacturing: Al-Mg Alloys." Invited presentation at Furukawa-SKY Aluminum Corp. in Fukaya, Japan, May 24, 2005.
  31. Eric M. Taleff. "From Superplastic Forming to Quick-Plastic Forming of Aluminum Sheet: The Realization of Mass Production." Invited presentation at Rice University, Houston, TX, March 16, 2005.
  32. Eric M. Taleff, W. Paul Green, Mary-Anne Kulas, Terry R. McNelley, and Paul E. Krajewski. "Analysis, Representation, and Prediction of Creep Transients in Class I Alloys." Presentation in The Langdon Symposium: Flow and Forming of Crystalline Materials: Creep at the 2005 TMS Annual Meeting in San Francisco, CA, February 14, 2005.
  33. Garud B. Sridhar, Alexandra Kulas, Lisa Widodo, Amanda Niazi, and Eric M. Taleff. "Application of the Johnson-Mehl-Avrami Equation to Numerical Predictions of the Pearlite Transformation." Presentation in Computational Microstructure Evolution in Steel: Multiphase Microstructure Evolution at the Materials Science and Technology 2004 Meeting in New Orleans, LA, September 28, 2004.
  34. Kenneth R. Tarcza, Eric M. Taleff, and Stephan Bless. "The Effects of Surface Condition and Initial Flaw Size on Dynamic Failure of Tungsten Heavy Alloy." Presentation in Mechanical Behavior of Body-Centered-Cubic (BCC) Metals: Dynamic Behaviors at the Materials Science and Technology 2004 Meeting in New Orleans, LA, September 28, 2004.
  35. James R. Ciulik and Eric M. Taleff. "Abnormal Dynamic Grain Growth During Creep Deformation in Commercial-Purity, Powder-Metallurgy (PM) Grade Mo Sheet." Presentation in Mechanical Behavior of Body-Centered-Cubic (BCC) Metals: Yielding and Plastic Flow at the Materials Science and Technology 2004 Meeting in New Orleans, LA, September 29, 2004.
  36. Eric M. Taleff. "An Overview of Creep Deformation Behaviors in 5000-Series and Al-Mg Alloys." Presentation in Advances in Superplasticity and Superplastic Forming at the 2004 TMS Annual Meeting in Charlotte, NC, March 16, 2004.
  37. Mary-Anne Kulas, W. Paul Green, Ellen C. Pettenfill, Paul E. Krajewski, and Eric M. Taleff. "Superplastic Failure Mechanisms and Ductility of AA5083." Presentation in Advances in Superplasticity and Superplastic Forming at the 2004 TMS Annual Meeting in Charlotte, NC, March 16, 2004.
  38. Jue Wang, Desiderio Kovar, and Eric M. Taleff. "Deformation of Superplastic Al2O3/Y-TZP Particulate and Particulate Laminate Composites." Presentation in Advances in Superplasticity and Superplastic Forming at the 2004 TMS Annual Meeting in Charlotte, NC, March 17, 2004.
  39. Bamdad Pourladian and Eric M. Taleff. "Development of High-Strength Steel Wire Ropes: High-Carbon Steel Microstructure Control." Presentation at the 5th International Rope Technology Workship in Houston, TX, March 9, 2004.
  40. Mary-Anne Kulas, W. Paul Green, Paul E. Krajewski, Terry R. McNelley, and Eric M. Taleff. "Deformation and Failure Mechanisms in Superplastic AA5083 Materials." Presentation at Materials Science and Technology 2003 in Chicago, IL, November 11, 2003.
  41. Eric M. Taleff and Garud B. Sridhar. "Pearlite as a Composite Material: An Overview of Mechanical and Electrical Properties." Presentation at Materials Science and Technology 2003 in Chicago, IL, November 11, 2003.
  42. Eric M. Taleff, Garud B. Sridhar, and Bamdad Pourladian. "Strength-Microstructure Relationships in Pearlitic Eutectoid and Hypereutectoid Steels." Presentation at the 2002 Conference Proceedings of The Wire Association International, Inc.: Wire & cable Technical Symposium, 72nd Annual Convention, Chicago, IL, USA, June 2002.
  43. Eric M. Taleff and Jun Qiao. "Numerical Modeling of Solute-Drag Creep." Presentation in Modeling the Performance of Engineering Structural Materials II at the 2001 TMS Fall Meeting in Indianapolis, in on November 4-8, 2001.
  44. Eric M. Taleff and Jun Qiao. "The Effects of Ternary Alloying Additions on Warm and Hot Deformation in Al-Mg Alloys." Presentation in the Light Metals 2001 Métaux Légers symposium of the 2001 Conference of Metallurgists in Toronto, Canada on August 18, 2001.
  45. Jennifer A. Hamilton, Dustin C. Balderach, and Eric M. Taleff. "The Potential for Paint-Bake Aging in Enhanced-Ductility Al Alloys I - Artificial Aging Studies." Presentation at the 2000 TMS Fall Meeting in St. Louis, MO, October 9, 2000.
  46. Dustin C. Balderach, Jennifer A. Hamilton, and Eric M. Taleff. "The Potential for Paint-Bake Aging in Enhanced-Ductility Al Alloys II - Natural Aging Effects." Presentation at the 2000 TMS Fall Meeting in St. Louis, MO, October 9, 2000.
  47. Eric M. Taleff, Peter J. Nevland, and Sean J. Yoon. "The Effect of Ternary Alloying Additions on Solute-Drag Creep in Aluminum-Magnesium Alloys." Invited presentation for the Honorary Symposium for Professor Oleg D. Sherby at the 2000 TMS Annual Meeting in Nashville, TN, March 14-16, 2000.
  48. Eric M. Taleff. "Ultrahigh-Carbon Steels for Ultrahigh-Strength Wire." Invited presentation to Wire Rope Corporation of America, St. Joseph, MO, November 11, 1999.
  49. Eric M. Taleff and Robert W. Hayes. "Correlation Between Creep Rate and Stacking Fault Energy during Dislocation Creep." Invited presentation at the TMS 1999 Annual Meeting symposium, Creep Behavior of Advanced Materials for the 21st Century, San Diego, CA, February 28th to March 4th, 1999.
  50. Eric M. Taleff, Peter J. Nevland, and Paul E. Krajewski."Solute-Drag Creep and Tensile Ductility in Aluminum Alloys." Presentation at the TMS 1999 Annual Meeting symposium, Creep Behavior of Advanced Materials for the 21st Century, San Diego, CA, February 28th to March 4th, 1999.
  51. Eric M. Taleff, Peter J. Nevland, Nathan Byman, Joël Larose, and Patrick Urgento. "Enhanced Ductility in Aluminum Alloys." Invited poster presented at the 1999 National Science Foundation CAREER Principal Investigator Meeting, Washington, DC, January 10-12, 1999.
  52. Eric M. Taleff, Chol K. Syn, Donald R. Lesuer, and Oleg D. Sherby. "A Comparison of Mechanical Behavior in Pearlitic and Spheroidized Hypereutectoid Steels." 1997 TMS Fall Meeting, Indianapolis, IN, September 14-17, 1997.
  53. Eric M. Taleff, Bruce L. Bramfitt, Chol K. Syn, Donald R. Lesuer, and Oleg D. Sherby. "Mechanical Behavior of an Ultrahigh-Carbon Steel Exhibiting a Damask Surface Pattern." 1997 TMS Fall Meeting, Indianapolis, IN, September 14-17, 1997.
  54. Eric M. Taleff and Woo-Jin Kim. "The Roles of Grain-Boundary Sliding and Dislocation-Pipe Diffusion in High-Strain-Rate Superplasticity." Seventh International Conference on Creep and Fracture of Engineering Materials and Structures, Irvine, CA, August 10-15, 1997.
  55. Kenneth S. Ball and Eric M. Taleff. "Can-in-Canister Alternative for Vitrification of Surplus Weapons Plutonium: Overview of Thermal Issues." NATO Advanced Research Workshop, Amarillo, TX, March 17-21, 1997.
  56. Eric M. Taleff, Donald R. Lesuer, Chol K. Syn, and Gregory A. Henshall. "Creep Fracture During Solute-Drag Creep and Superplastic Deformation." 1997 TMS Annual Meeting, Orlando, FL, February 10-13, 1997.
  57. Eric M. Taleff, Gregory A. Henshall, Donald R. Lesuer, T. G. Nieh, and Jeffrey Wadsworth. "Enhanced Tensile Ductility in Al-Mg Alloys by Solid-Solution Interactions." 1995 TMS Fall Meeting, Cleveland, OH, October 29 - November 2, 1995.
  58. Eric M. Taleff, Gregory A. Henshall, Donald R. Lesuer, T. G. Nieh, and Jeffrey Wadsworth. "Enhanced Ductility of Coarse-Grain Al-Mg Alloys." 1995 TMS Annual Meeting, Las Vegas, NV, February 13-15, 1995.

To the top of page

Eric M. Taleff